How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners have a unique set of steps to add an additional key. It requires dealer service with a handheld computer dubbed Tech-2. Then the transponder is replaced and a key have to be purchased.
It is a good idea to rotate your keys so that one doesn't wear out faster than the other. This will also keep your keys in top condition.
Replacement Case
The new key fobs do not look like the old Saab keys. They're equipped with electronic devices which make it hard to copy. This has made stealing car keys considerably more difficult than it was years ago. It also makes it more expensive to replace keys lost.
Saab 9-3 owners should have two keys working. If one is lost, it costs a fortune to purchase a new one for the vehicle because it requires replacing the CIM module, and then reprogramming the locking cylinders. Dealers will typically charge $100-$200 to complete this.
There are some ways around these costly. Some parts providers will use the code of an extra key to cut a brand new metal blade at a fraction the price of the dealer. The key must be exactly the same as the original to allow it to work in your vehicle.
Follow these steps to replace the case. You'll need an open-faced screwdriver and a lot of patience. With the screwdriver you can pull away the plastic and take out the emergency key. Once the case is open, remove the electronics and put them in your new case. Make sure saab key fob replacement put the correct key and badge back in the case too.
Replacement Battery
The Saab 9-3 replacement battery is a cheap component that can be easily and quickly replaced. The YouTube video of Cyclone Cyd demonstrates how to replace the remote fob battery with only four steps. This tutorial can be used with any modern Saab key fob. However, the procedure could differ slightly.
The first step is to locate the button that releases the backup key on the fob. This button is typically located on the back of your fob, just below the Saab Logo. Next use an screwdriver with a flat head to insert into the small hole in this button. This will be enough to allow you to open the fob's case so that you can replace the battery.
After you have installed the batteries CR1632, it is possible to restore your remote key fob. Then, you can program it into your car. The whole process should take more than an hour, if not less. It's a simple procedure that doesn't require any special tools.
The procedure is a little more complex if you lose your key, but it's possible. The dealer must find the VIN number of the car and then order a replacement key blade and TWICE module with the proper unique code. The dealer will then need to program the key using MDI an innovative software tool.
Key Replacement Fob
The key fob has an internal battery that is used to lock and unlock your car. Batteries have a finite lifespan and will eventually die. This is a common problem that happens with all cars and the good thing is that you can change the batteries in many key fobs and not have to replace the entire case. You can purchase fobs replacements on Amazon that come with all the electronics already installed, which means you can just pop open the case and replace the batteries in the original case. You'll need to remove the emergency key before you replace the batteries. To do this, you need to insert a small screwdriver that is flat into the slot in the middle of the. Use the screwdriver to move around the case, and it should split open, making it easy to take it out.
If you're ready to replace your keys, have a spare in your possession. This will save you lots of money. If you do have a spare, you can ask the dealer cut an additional key and program it to the car, which is much cheaper than replacing the entire key fob.
If you don't have a spare, it is possible to add another key to your car, but it requires a lot of research and effort. It can cost a few hundred dollars to get a second car key. The computer of the car must also be programmed. Professionals can accomplish this however, it's a costly option.
Replacement Ignition
The modern SAAB 9-3 is an advanced alarm system built on a keycode. This means that if you lose your only working key, adding an additional one could be extremely expensive since the car has to have a computer module added and it also needs to be specifically programmed to accept a new key. Even a dealer can charge hundreds of dollars to program an entirely new key, when they are not able to do it.
If you've lost the only working key the dealer will replace the computer in your car (known as the CIM or SAAB TWICE) to make a replacement, and they will charge a premium for it. Instead, we can reprogram the EEPROM of your current car computer, preparing it for a new key, saving you over 50% of the amount you have to pay at a dealership.
If you have owned a car like the SAAB 9-3 for a long time you're aware that the ignition keys aren't very durable. They can become extremely sticky and the buttons can fall off from time to time, so you should consider replacing your ignition key if it isn't performing as it should. Luckily, replacing the ignition key isn't as difficult as it sounds and is fairly easy to do with the appropriate tools.